Features
Automatically locked dispense button
For safety protection, the Dispense Button automatically locks approximately 10 seconds after dispensing hot water. Pressing the Lock/Unlock button and then the Dispense button allows water to be poured again.
Boil Setting
Long boiling (4-minute chlorine-reduction)
The long boil setting boils the water, continuously, for about four minutes to reduce chlorine content in tap water.
Reboil setting
Brings water to 100ºC again.
Built-in microprocessor
The microprocessor system activates with distinctive beeping sounds to notify you of three different conditions: when water has completely boiled, when overheating is detected, and when the Thermo Pot is unplugged. A flashing light will notify you of these functions.
Cleaning mode
To keep the thermo pot functioning at its best, keep it clean with lemon juice or package cleaners.
Cordless/4-level dispensing
Hot water can be dispensed even if the cord is removed or during a power failure/interruption. Dispense volume of hot water varies depending on degree of pressing and dispensing time.
Diamond fluorine & charcoal coating
Particles of diamond and ground BINCHO charcoal are mixed with fluorine and used for inner container. Colour, taste and aroma of tea can be maintained.
Healthy tea mode: Boiled water is alkalified and promotes easy extraction of tea component such as cathechin.
Economy timer
Keeps water warm economically. The 6 and 10 hour economy timer can reduce the amount of electricity used.
Interior
Magnetic plug
This safety feature helps to keep the entire unit from falling when the power cord gets caught.
More available water
Thanks to the Panasonic bottom heating system, the Electric Thermo Pot can hold up to five cups more water than conventional Thermo Pots.
Overheating protection (Empty heating protection)
Turns off the heater automatically if you attempt to boil water with less than the minimum volume of 0.3 litres (10-fl. oz.) of water. The "LongBoil/Reboil" and "Keep Warm" indicator lights flash alternate.
Rotating body
The rotating body design allows water to be poured out at a convenient position, regardless of the position of the Thermo Pot.
Safe and easy-to-remove lid
The lid can be easily removed. Simply lift it up while pushing the lever in the joint between the lid cover and the Thermo Pot body.
Vacuum insulation panel
This technology uses high insulation glass fiber materials and vacuum panel to maintain water temperature. Vacuum insulation panels (VIPs) offer excellent thermal resistance properties that can enhance the energy efficiency of the insulating systems and provide savings in energy consumption.
